I must say I'm quite pleased with it, the holes actually line up with the buttons :-).
 |
| Finished article |
 |
| 3D concept design |
Thursday, 9 April 2015
Finished Shortcut Keyboard
The Acrylic tops and bottoms arrived yesterday for the keyboard so I thought I'd update the blog with a picture of the finished item side by side with the concept design,
I must say I'm quite pleased with it, the holes actually line up with the buttons :-).
I must say I'm quite pleased with it, the holes actually line up with the buttons :-).
Subscribe to:
Posts (Atom)
Hot water control using a Raspberry Pi Zero W
Following on from the first blog about the hot water heating control here's what I put together for the mounting. Whilst looking for a...
Popular Posts
-
When I made the smaller screw on sensor that connected to the PC and fed the timing into a PC application, it got me thinking about differen... -
A few people have expressed interest in making a DIY chronograph so I said I'd put together a shopping list. There are quite a few opt... -
As anyone who's read this blog before will know, there's a common theme throughout, the DIY Chronograph I made for measuring the spe...